Top Tec 4200 5W-30 Engine Oil by LIQUI MOLY
PRODUCT TYPE: Engine Oils 4-Stroke Car
VENDOR: LIQUI MOLY
Hurry up! Sales Ends In
High-tech low-friction motor oil based on synthetic technology. Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine. Depending on the manufacturer's specifications, oil change intervals of up to 30,000 or 50,000 km or every 2 years for low mileage drivers are thus possible.
For gasoline and diesel engines that meet the Euro 4, Euro 5 and Euro 6 emission standards (including FSI, common rail and pumped jet injection). Also suitable for gas-driven vehicles (CNG/LPG) and vehicles with a diesel particulate filter (DPF), even if retrofitted. Exception: R5 and V10 TDI engines before manufacture year 06/2006. Tested for use with turbochargers and catalytic converters.
Ensures excellent engine cleanliness and exceeds even the strictest test requirements of wellknown vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.).
- Tested for turbochargers and catalytic converters
- Reduces pollutant emissions
- Smooth engine running
- Reduces fuel consumption
- Instant lubrication after cold start
- Long engine service life
- Excellent wear resistance
- Optimum oil pressure under all operating conditions
- Outstanding engine cleanliness
- High lubrication reliability
- Optimum stability to aging
- High shear stability
SPECIFICATIONS AND APPROVALS
- ACEA C3
- API SP
- BMW Longlife-04
- MB-Approval 229.31
- MB-Approval 229.51
- Porsche C30
- VW 504 00
- VW 507 00
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:
- ACEA C2
- BMW Longlife-01 (up to 2018)*
- BMW Longlife-01 FE (up to 2018)*
- Fiat 9.55535-S1
- Fiat 9.55535-S3
- VW 500 00
- VW 501 01
- VW 502 00
- VW 503 00
- VW 503 01
- VW 505 00
- VW 505 01
- VW 506 00
- VW 506 01 (With the exception of R5 and V10 TDI engines before 6/2006)
- *limited to BMW gasoline engines without particle filters in the EU including Norway, Switzerland and Liechtenstein
SAE class (engine oils): 5W-30 SAE J300
Density at 15 °C: 0,855 g/cm³ DIN 51757
Viscosity at 40 °C: 70,0 mm²/s ASTM D 7042-04
Viscosity at 100 °C: 12,2 mm²/s ASTM D 7042-04
Viscosity at -35 °C (MRV): < 60000 mPas ASTM D4684
Viscosity at -30°C (CCS): ≤ 6600 mPas ASTM D5293
Viscosity index: 173 DIN ISO 2909
HTHS at 150°C: ≥ 3,5 mPas ASTM D5481
Pour point: -42 °C DIN ISO 3016
Evaporation loss (Noack): 9,5 % CEC-L-40-A-93
Flash point: 230 °C DIN ISO 2592
Total base number: 8,5 mg KOH/g DIN ISO 3771
Sulfate ash: ≤ 0,8 g/100g DIN 51575
Color number (ASTM): L 3,0 DIN ISO 2049
AREAS OF APPLICATION
For gasoline and diesel engines that meet the Euro 4, Euro 5 and Euro 6 emission standards (including FSI, common rail and pumped jet injection). Also suitable for gas-driven vehicles (CNG/LPG) and vehicles with a diesel particulate filter (DPF), even if retrofitted. Exception: R5 and V10 TDI engines before manufacture year 06/2006. Tested for use with turbochargers and catalytic converters. For universal application for the latest engine technologies from Audi, BMW, Mercedes-Benz and the VW Group.
The specifications and instructions from the assembly or vehicle manufacturer must be followed! Optimum effectiveness is only possible when the product is used unmixed. Note for workshops: The residual amount of a commercially available oil must not exceed 5 percent for tank systems.
All orders are sent on to our order processing team within 24 hours of the order being placed. This team usually then take from between 1 - 3 working days to process and dispatch your shipment. continue reading
Once we have completed the processing stage of your order and dispatched your item(s), standard delivery on average takes from between 3 - 5 working days to arrive to you while express delivery takes from between 1 - 3 working days to arrive to you. continue reading
lmpuk.com offer free standard delivery on all orders over £50. For orders under £50 we charge a flat rate standard delivery fee of £4.99 per order. For express delivery we charge a flat rate delivery fee of £9.99 per order. Shipping upgrades where available can be purchased in the ‘shipping’ section on cart page when completing your purchase.
All orders are shipped with a fully trackable delivery service. Tracking information will be sent to you by email once your order has been successfully dispatched.
We currently do not offer an international shipping service to addresses outside of the United Kingdom. This is something we are working on and hopefully will be able to offer in the not so distant future. Apologies for any inconvenience this may cause you.
View our full shipping policy here: Shipping policy
We offer a 28 day return policy from the point of sale. If 28 days have gone by since your purchase we unfortunately cannot accept your return.
To be eligible for a return items must be returned and received back at our warehouse within 28 days from the point of sale. All returning item(s) must be sent back in the same condition and packing they were received in; items must also be unused, unopened and adequately packaged. We retain the right to withhold a portion of the total refund amount and / or cancel a return if the above return requirements are not met.
View our full return policy here: Return policy
LM Performance is the authorised distributor of Liqui Moly products in the UK, supplying the motorsports, vehicles tuning, classic car, marine sports and high-performance vehicle sectors with the extensive range of oils, additives and workshop chemicals made in Germany.
The company is arranging exclusive opportunities for motorsport engine builders, vehicles preparers, competitors, organisers and championship providers to promote the use of Liqui Moly oils and additives in the most extreme and competitive conditions.
LM Performance is happy to provide full technical assistance in conjunction with Liqui Moly from their state-of-the-art laboratories in Germany.
We wish all of our family of customers great success in all forms of motorsport.
We hope you enjoy our products and service offering as much we enjoy using the products ourselves.
If you have any questions, comments or concerns please feel free to get in contact with our friendly customer service team who will be delighted to assist you.
Robb Gravett - CEO
View our full story here: About us