Fully Synthetic Hypoid Gear Oil (GL5) LS SAE 75W-140 by LIQUI MOLY
PRODUCT TYPE: Transmission Fluid
VENDOR: LIQUI MOLY
Hurry up! Sales Ends In
Full synthetic hypoid transmission oil with extremely high performance reserves. Ensures exact friction behavior and provides outstanding ageing resistance. Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning. Greatest lubrication security, maximum wear protection through large viscosity bandwidth. Reduces transmission noise. Enables maximum oil change intervals.
For highly stressed axle drives with and without limited-slip differentials – especially for vehicles in which the aggregate or vehicle manufacturer specifies oil with Limited Slip additives (LS). Perfectly suitable for motorsports. Comply with the vehicle or aggregate manufacturer’s instructions. LIQUI MOLY recommends this product especially for BMW axle drives.
High-quality, fully-synthetic hypoid gear oil for extreme load conditions, which has been specially developed for use in final drives with and without locking differentials. It contains special additives, which in addition to outstanding EP properties also mean that the oil is capable of altering the frictional coefficient between the clutch plates in such a way as to prevent stick-slip and its consequential judder. This fulfils the special requirements of well-known vehicle manufacturers such as BMW automobiles.
- Excellent viscosity/temperature properties
- Reduces running noise
- Outstanding corrosion protection
- Excellent wear resistance
- Very compatible with seals
- High pressure-absorption capability
- For extended oil-change intervals
- Excellent resistance to aging
SPECIFICATIONS AND APPROVALS
- API GL5
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:
- BMW real-axel tranmission oil
- Ford WSL-M2C 192-A
- Scania STO 1:0
- VME ∙ ZF TE-ML 05D
- ZF TE-ML 12D
- ZF TE-ML 16G
- ZF TE-ML 21D
SAE class (gear oils): 75W-140 SAE J306
Density at 15 °C: 0,875 g/cm³ DIN 51757
Viscosity at 40 °C: 179 mm²/s ASTM D 7042-04
Viscosity at 100 °C: 25,0 mm²/s ASTM D 7042-04
Viscosity at -40°C (Brookfield): <= 150000 mPas ASTM D 2983-09
Viscosity index: 172 DIN ISO 2909
Pour point: -51 °C DIN ISO 3016
Flash point: 208 °C DIN ISO 2592
Color number (ASTM): L 1,5 DIN ISO 2049
AREAS OF APPLICATION
For extremely high-load final drives with and without locking differentials and ancillaries.
The operating instructions of the vehicle and transmission manufacturers must be followed. Can be mixed with mineral oil residue, which remains in final drive/ancillary when changing oil.
All orders are sent on to our order processing team within 24 hours of the order being placed. This team usually then take from between 1 - 3 working days to process and dispatch your shipment. continue reading
Once we have completed the processing stage of your order and dispatched your item(s), standard delivery on average takes from between 3 - 5 working days to arrive to you while express delivery takes from between 1 - 3 working days to arrive to you. continue reading
lmpuk.com offer free standard delivery on all orders over £50. For orders under £50 we charge a flat rate standard delivery fee of £4.99 per order. For express delivery we charge a flat rate delivery fee of £9.99 per order. Shipping upgrades where available can be purchased in the ‘shipping’ section on cart page when completing your purchase.
All orders are shipped with a fully trackable delivery service. Tracking information will be sent to you by email once your order has been successfully dispatched.
We currently do not offer an international shipping service to addresses outside of the United Kingdom. This is something we are working on and hopefully will be able to offer in the not so distant future. Apologies for any inconvenience this may cause you.
View our full shipping policy here: Shipping policy
We offer a 28 day return policy from the point of sale. If 28 days have gone by since your purchase we unfortunately cannot accept your return.
To be eligible for a return items must be returned and received back at our warehouse within 28 days from the point of sale. All returning item(s) must be sent back in the same condition and packing they were received in; items must also be unused, unopened and adequately packaged. We retain the right to withhold a portion of the total refund amount and / or cancel a return if the above return requirements are not met.
View our full return policy here: Return policy
LM Performance is the authorised distributor of Liqui Moly products in the UK, supplying the motorsports, vehicles tuning, classic car, marine sports and high-performance vehicle sectors with the extensive range of oils, additives and workshop chemicals made in Germany.
The company is arranging exclusive opportunities for motorsport engine builders, vehicles preparers, competitors, organisers and championship providers to promote the use of Liqui Moly oils and additives in the most extreme and competitive conditions.
LM Performance is happy to provide full technical assistance in conjunction with Liqui Moly from their state-of-the-art laboratories in Germany.
We wish all of our family of customers great success in all forms of motorsport.
We hope you enjoy our products and service offering as much we enjoy using the products ourselves.
If you have any questions, comments or concerns please feel free to get in contact with our friendly customer service team who will be delighted to assist you.
Robb Gravett - CEO
View our full story here: About us