In stock
Out stock

Ceramic Paste (Spray) by LIQUI MOLY

SKU: 3419

BARCODE: 4100420034190

PRODUCT TYPE: Brake Pastes



Hurry up! Sales Ends In

Real time 21 visitor right now


"Partly synthetic, white high-temperature paste. Prevents seizing, cold welding, rust freezing and stick-slip. Metal-free. Very good wear and corrosion protection. Universal use. Resistant to hot and cold water as well as to acids and alkalis. Application range – 40 °C to + 1400 °C."

For lubrication of all kinds of high-load sliding surfaces. Especially for low speeds and oscillating movements. Separation of components subject to heat stress. Corrosion protection at bolts, pins, studs, flanges, spindles and fittings.


Partially synthetic, metal-free universal paste which has been formulated for the most demanding applications. The combination of a partially synthetic base oil, a mature additive technology and the most state-ofthe-art solid lubricants from the area of high-tech ceramics have produced a high-performance paste for universal use.


- Prevents seizing and cold welding
- Prevents stick slip
- Especially cold, hot and splash-water resistant
- Non-toxic
- Does not attack common sealing materials
- Resistant to certain organic acids and alkalis
- Prevents brake noise
- Highest load-carrying capacity


Color / appearance: weiß / white
Base: Synthese-, Mineralöl / synthetic oil, mineral oil
Thickener: anorganische Dickungsmittel und helle Festschmierstoffe
Dropping point: keiner
Operating temperature range: -40 bis +200 kurzfristig bis +250 / -40 °C to +200 °C short term +250 °C °C als Schmierpaste -40 bis +1400 / -40 to +1400 °C als Trennpaste
Unworked penetration: ~ 340
Base oil viscosity 40°C: ~ 100 mm²/s
Four-ball tester material load/weld force: 3800/4000 N DIN 51 350,4
Friction numbers - thread: 0,10 DIN 946
Pressfit test (no stick slip): 0,08 LFW-4
SRV (cylinder/plate; 450 N, 1,000 µm, 50 Hz, 2 h) - friction number: 0,10 - 0,13 µm Reibungszahl
Form: Paste
Odor: charakteristisch / characteristic


Used for lubricating all types of high-load sliding surfaces. Used especially for low slide speeds and/or oscillating movements and for screw, plug-in and bayonet connectors made from steel and non-ferrous metals.

Separation of components subject to heat stress, such as internal combustion engines, turbines and motor vehicle brake systems. Corrosion protection of bolts, pins, studs, flanges, spindles and seatings in refineries, steel and cement works as well as shipping and agricultural engineering.


Before treating with Ceramic Paste, all components must be clean and free from residues, dirt and moisture. Apply to cleaned surfaces using a paint brush, brush or lint-free cloth. Apply the amount which is appropriate for the application.



All orders are sent on to our order processing team within 24 hours of the order being placed. This team usually then take from between 1 - 3 working days to process and dispatch your shipment. continue reading


Once we have completed the processing stage of your order and dispatched your item(s), standard delivery on average takes from between 3 - 5 working days to arrive to you while express delivery takes from between 1 - 3 working days to arrive to you. continue reading

SHIPPING COSTS offer free standard delivery on all orders over £50. For orders under £50 we charge a flat rate standard delivery fee of £4.99 per order. For express delivery we charge a flat rate delivery fee of £9.99 per order. Shipping upgrades where available can be purchased in the ‘shipping’ section on cart page when completing your purchase.


All orders are shipped with a fully trackable delivery service. Tracking information will be sent to you by email once your order has been successfully dispatched.


We currently do not offer an international shipping service to addresses outside of the United Kingdom. This is something we are working on and hopefully will be able to offer in the not so distant future. Apologies for any inconvenience this may cause you.

View our full shipping policy here: Shipping policy


We offer a 28 day return policy from the point of sale. If 28 days have gone by since your purchase we unfortunately cannot accept your return.

To be eligible for a return items must be returned and received back at our warehouse within 28 days from the point of sale. All returning item(s) must be sent back in the same condition and packing they were received in; items must also be unused, unopened and adequately packaged. We retain the right to withhold a portion of the total refund amount and / or cancel a return if the above return requirements are not met.

View our full return policy here: Return policy


LM Performance is the authorised distributor of Liqui Moly products in the UK, supplying the motorsports, vehicles tuning, classic car, marine sports and high-performance vehicle sectors with the extensive range of oils, additives and workshop chemicals made in Germany.

The company is arranging exclusive opportunities for motorsport engine builders, vehicles preparers, competitors, organisers and championship providers to promote the use of Liqui Moly oils and additives in the most extreme and competitive conditions.

LM Performance is happy to provide full technical assistance in conjunction with Liqui Moly from their state-of-the-art laboratories in Germany.

We wish all of our family of customers great success in all forms of motorsport.

We hope you enjoy our products and service offering as much we enjoy using the products ourselves.

If you have any questions, comments or concerns please feel free to get in contact with our friendly customer service team who will be delighted to assist you.

Robb Gravett - CEO

View our full story here: About us use cookies to offer you a better browsing experience. Find out more information on how we use cookies by clicking the ‘privacy policy’ link below.

Ceramic Paste (Spray) by LIQUI MOLY

Ceramic Paste (Spray) by LIQUI MOLY