Pro-Line Diesel Particulate Filter Cleaner by LIQUI MOLY
PRODUCT TYPE: Service Products
VENDOR: LIQUI MOLY
Hurry up! Sales Ends In
Highly effective fluid for cleaning clogged passenger car diesel particulate filters when installed. Dissolves hardened, dense and encrusted contaminants on the surface of diesel particulate filters. Secures optimum vehicle handling, engine performance and low fuel consumption. Regular cleaning in combination with flushing can help avoid expensive repairs.
For passenger car diesel engines with diesel particulate filter (DPF/FAP).
regeneration aid for diesel particulate filters - guarantees low fuel consumption - optimal engine performance - reduces operating costs
Color / appearance blue, clear Density at 15 °C 1,005 g/ml Base cleaning, carrier liquid pH value 11,3 Odor characteristic Form liquid
AREAS OF APPLICATION
For passenger car diesel engines with diesel particulate filter (DPF/FAP). Special short-distance vehicles and city vehicles are primarily affected by problems with clogged diesel particulate filters.
Cleaning is performed with the DPF Pressurized Tank Spray Gun (part no. 7946) and the specially developed DPF Probe with 5 interchangeable tips (part no. 7945). Depending on the type of vehicle, establish access to the diesel particulate filter. On most vehicles, remove the temperature or pressure sensor of the diesel particulate filter for this. Note: The temperature of the particulate filter during cleaning should be less than 40 °C. In some vehicles the diesel particulate filter is located near the exhaust manifold or in some cases the turbocharger rather than on the underbody. For safety reasons, extreme care must be taken when cleaning these vehicles to ensure that no cleaning or flushing fluid gets into the combustion chamber through an exhaust valve that has been left open. Introduce the appropriate Pro-Line Spray Probe for the type of vehicle into the particulate filter through the opening that is created. The total amount of ProLine Diesel Particulate Filter Cleaner (1 l) is sprayed directly onto the surface of the particulate filter in several intervals of 5 – 10 seconds with a break of 5 – 10 seconds in each case at an operating pressure of 6 – 8 bar. In order to coat the entire surface to the greatest possible extent, turn the probe and move it back and forth when cleaning. Wait approx. 15 minutes to allow the cleaner to take effect. Then flush the particulate filter with the total amount of Pro-Line Diesel Particulate Filter Purge (500 ml). Processing is likewise performed with the DPF Pressurized Tank Spray Gun at the same intervals as for the cleaning fluid. The cleaning dissolves the soot enough and distributes it in the particulate filter so that it can be burned off with normal regeneration. After the sensor has been reinstalled, the service operation or the workshop must initiate a regeneration as per the manufacturer’s specifications.
All orders are sent on to our order processing team within 24 hours of the order being placed. This team usually then take from between 1 - 3 working days to process and dispatch your shipment. continue reading
Once we have completed the processing stage of your order and dispatched your item(s), standard delivery on average takes from between 3 - 5 working days to arrive to you while express delivery takes from between 1 - 3 working days to arrive to you. continue reading
lmpuk.com offer free standard delivery on all orders over £50. For orders under £50 we charge a flat rate standard delivery fee of £4.99 per order. For express delivery we charge a flat rate delivery fee of £9.99 per order. Shipping upgrades where available can be purchased in the ‘shipping’ section on cart page when completing your purchase.
All orders are shipped with a fully trackable delivery service. Tracking information will be sent to you by email once your order has been successfully dispatched.
We currently do not offer an international shipping service to addresses outside of the United Kingdom. This is something we are working on and hopefully will be able to offer in the not so distant future. Apologies for any inconvenience this may cause you.
View our full shipping policy here: Shipping policy
We offer a 28 day return policy from the point of sale. If 28 days have gone by since your purchase we unfortunately cannot accept your return.
To be eligible for a return items must be returned and received back at our warehouse within 28 days from the point of sale. All returning item(s) must be sent back in the same condition and packing they were received in; items must also be unused, unopened and adequately packaged. We retain the right to withhold a portion of the total refund amount and / or cancel a return if the above return requirements are not met.
View our full return policy here: Return policy
LM Performance is the authorised distributor of Liqui Moly products in the UK, supplying the motorsports, vehicles tuning, classic car, marine sports and high-performance vehicle sectors with the extensive range of oils, additives and workshop chemicals made in Germany.
The company is arranging exclusive opportunities for motorsport engine builders, vehicles preparers, competitors, organisers and championship providers to promote the use of Liqui Moly oils and additives in the most extreme and competitive conditions.
LM Performance is happy to provide full technical assistance in conjunction with Liqui Moly from their state-of-the-art laboratories in Germany.
We wish all of our family of customers great success in all forms of motorsport.
We hope you enjoy our products and service offering as much we enjoy using the products ourselves.
If you have any questions, comments or concerns please feel free to get in contact with our friendly customer service team who will be delighted to assist you.
Robb Gravett - CEO
View our full story here: About us