Special Tec F 5W-30 Engine Oil by LIQUI MOLY
PRODUCT TYPE: Engine Oils 4-Stroke Car
VENDOR: LIQUI MOLY
Hurry up! Sales Ends In
"Particularly suitable for Ford vehicles. Low-friction motor oil based on synthetic technology. Reliably prevents the formation of deposits, has extremely high shear stability, reduces frictional losses in the engine and provides outstanding protection against wear. Especially suitable where there are long intervals between oil changes and heavy duty engine requirements."
Required for various vehicle types from 2011. Backwards compatible and can be used without hesitation in older Ford vehicles from 7/1998. Also suitable for vehicles from various other manufacturers. Tested for use with turbochargers and catalytic converters. Not suitable for VW with extended maintenance intervals (WIV)!
Low-friction motor oil based on synthetic technology. Reliably prevents the formation of deposits, has extremely high shear stability, reduces frictional losses in the engine and provides outstanding protection against wear. Ideal for modern gasoline and diesel engines with and without multi-valve technology, Valvetronic and turbocharging (with or without diesel particulate filter (DPF) and charge air cooling). Especially suitable where there are long intervals between oil changes and heavy duty engine requirements.
- Optimum stability to aging
- High lubrication reliability
- Instant lubrication after cold start
- Tested for turbochargers and catalytic converters
- High engine cleanliness
- Saves fuel and reduces pollutant emissions
- High shear stability
SPECIFICATIONS AND APPROVALS
- ACEA A5
- ACEA B5
- Ford WSS-M2C 913-D
- Jaguar / Land Rover STJLR.03.5003
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:
- Fiat 9.55535-G1
- Ford WSS-M2C 913-A
- Ford WSSM2C 913-B
- Ford WSS-M2C 913-C
- IVECO 18-1811 S1
SAE class (engine oils): 5W-30 SAE J300
Density at 15 °C: 0,855 g/cm³ DIN 51757
Viscosity at 40 °C: 52,4 mm²/s ASTM D 7042-04
Viscosity at 100 °C: 9,9 mm²/s ASTM D 7042-04
Viscosity at -35 °C (MRV): < 60000 mPas ASTM D4684
Viscosity at -30°C (CCS): ≤ 6600 mPas ASTM D5293
Viscosity index: 179 DIN ISO 2909
HTHS at 150°C: 2,9 - 3,5 mPas ASTM D5481
Flash point: 220 °C DIN ISO 2592
Pour point: -42 °C DIN ISO 3016
Evaporation loss (Noack): 12,0 % CEC-L-40-A-93
Total base number: 11,1 mg KOH/g DIN ISO 3771
Sulfate ash: 0,85 g/100g DIN 51575
Color number (ASTM): L3,5 DIN ISO 2049
AREAS OF APPLICATION
The latest specification from Ford (WSS-M2C 913-D) is primarily required for various vehicle types from 2011. Backwards compatible and can be used without hesitation in older Ford vehicles from 7/1998. Also suitable for vehicles from various other manufacturers. Tested for use with turbochargers and catalytic converters.Not suitable for VW with extended maintenance intervals (WIV)!
The specifications and instructions from the assembly or vehicle manufacturer must be followed!
All orders are sent on to our order processing team within 24 hours of the order being placed. This team usually then take from between 1 - 3 working days to process and dispatch your shipment. continue reading
Once we have completed the processing stage of your order and dispatched your item(s), standard delivery on average takes from between 3 - 5 working days to arrive to you while express delivery takes from between 1 - 3 working days to arrive to you. continue reading
lmpuk.com offer free standard delivery on all orders over £200. For orders under £200 we charge a flat rate standard delivery fee of £9.99 per order. For express delivery we charge a flat rate delivery fee of £15.99 per order. Shipping upgrades where available can be purchased in the ‘shipping’ section on cart page when completing your purchase.
All orders are shipped with a fully trackable delivery service. Tracking information will be sent to you by email once your order has been successfully dispatched.
We currently do not offer an international shipping service to addresses outside of the United Kingdom. This is something we are working on and hopefully will be able to offer in the not so distant future. Apologies for any inconvenience this may cause you.
View our full shipping policy here: Shipping policy
We offer a 28 day return policy from the point of sale. If 28 days have gone by since your purchase we unfortunately cannot accept your return.
To be eligible for a return items must be returned and received back at our warehouse within 28 days from the point of sale. All returning item(s) must be sent back in the same condition and packing they were received in; items must also be unused, unopened and adequately packaged. We retain the right to withhold a portion of the total refund amount and / or cancel a return if the above return requirements are not met.
View our full return policy here: Return policy
LM Performance is the authorised distributor of Liqui Moly products in the UK, supplying the motorsports, vehicles tuning, classic car, marine sports and high-performance vehicle sectors with the extensive range of oils, additives and workshop chemicals made in Germany.
The company is arranging exclusive opportunities for motorsport engine builders, vehicles preparers, competitors, organisers and championship providers to promote the use of Liqui Moly oils and additives in the most extreme and competitive conditions.
LM Performance is happy to provide full technical assistance in conjunction with Liqui Moly from their state-of-the-art laboratories in Germany.
We wish all of our family of customers great success in all forms of motorsport.
We hope you enjoy our products and service offering as much we enjoy using the products ourselves.
If you have any questions, comments or concerns please feel free to get in contact with our friendly customer service team who will be delighted to assist you.
Robb Gravett - CEO
View our full story here: About us